Jump to content


Photo

Mario Kart 8 disc label has spots on it.


  • Please log in to reply
8 replies to this topic

#1 Nintendokid89

Nintendokid89

    Goomba

  • Members
  • 7 posts

Posted 11 October 2014 - 09:12 PM

So I had to buy a new Mario Kart 8 disc from Amazon since my first one went bad, and upon further inspection I had noticed that it has shiny spots on it on the label. Which seems to be the label with a few chips in it revealing the disc under it. Awhile back someone else posted a pic showing this problem as well on another forum. Mine are kinda like his.

 

http://techforums.ni...11435/image.jpg

 

So yeah should I contact Amazon and get a replacement? Or will it not hurt much? 

 



#2 Raiden

Raiden

    wall crusher

  • Members
  • 4,738 posts

Posted 11 October 2014 - 09:24 PM

Yes. Get a replacement. If it gets worse you risk the game not working.

http://photocollector.net/TipCD.htm

If you see light holding it up to a lamp in those scratches then the disc maybe useless.


Edited by Ryudo, 11 October 2014 - 09:27 PM.


#3 Mewbot

Mewbot

    I'm batman

  • Members
  • 2,027 posts
  • NNID:R00bot
  • Fandom:
    Legend of Zelda and Super Smash Bros.

Posted 12 October 2014 - 12:10 AM

Yes. Get a replacement. If it gets worse you risk the game not working.

http://photocollector.net/TipCD.htm

If you see light holding it up to a lamp in those scratches then the disc maybe useless.

Geez that's crazy. I never knew that. Is this the same with blurays?


Y U READ THIS?...WHY IS THERE TEXT HERE? LOL WTF
       bi5tzqg.gif
 

                                 Wii U ID : R00bot


#4 xile6

xile6

    Alchemist

  • Members
  • 1,532 posts
  • NNID:xile06x

Posted 12 October 2014 - 12:29 PM

Geez that's crazy. I never knew that. Is this the same with blurays?

Yes the data is stored on sliver top layer.
If that part gets messed up its all over.
The bottom of the disc is the clear layer, it can get scratch to hell and then you can buff it out to be clear and readable again.
youtube ch. http://www.youtube.com/user/xile2010/
xile06 "N" ID
Cod bo2, AC3, Zombiu, NSMB, Pikmin 3, Wind Waker HD, Smash Bro wiiu,
Preorders : ..
Plan to buy : -

#5 LemonSlice

LemonSlice

    Goomba

  • Members
  • 2 posts

Posted 14 October 2014 - 05:36 AM

Yes the data is stored on sliver top layer.
If that part gets messed up its all over.
The bottom of the disc is the clear layer, it can get scratch to hell and then you can buff it out to be clear and readable again.

I have to correct you on this. The data is actually printed in the clear polycarbonate layer. The top aluminum layer is there to reflect the laser (the artwork is printed on another layer on top of that), so if it's missing in spots, the laser goes through and the drive can't read the disc.

 

The reason the disc can get scratched and still be read is because the data is not located in the very surface of the polymer.


Edited by LemonSlice, 14 October 2014 - 05:38 AM.


#6 xile6

xile6

    Alchemist

  • Members
  • 1,532 posts
  • NNID:xile06x

Posted 14 October 2014 - 03:02 PM

I have to correct you on this. The data is actually printed in the clear polycarbonate layer. The top aluminum layer is there to reflect the laser (the artwork is printed on another layer on top of that), so if it's missing in spots, the laser goes through and the drive can't read the disc.

 

The reason the disc can get scratched and still be read is because the data is not located in the very surface of the polymer.

yes you are correct.

I have just always went on it being that top layer but its the layer under that. The bottom is the clear part. You can see all the layers  on old disc


youtube ch. http://www.youtube.com/user/xile2010/
xile06 "N" ID
Cod bo2, AC3, Zombiu, NSMB, Pikmin 3, Wind Waker HD, Smash Bro wiiu,
Preorders : ..
Plan to buy : -

#7 storabajskorven

storabajskorven

    Boo

  • Members
  • 572 posts
  • NNID:Stranders

Posted 15 October 2014 - 05:17 AM

So I had to buy a new Mario Kart 8 disc from Amazon since my first one went bad, and upon further inspection I had noticed that it has shiny spots on it on the label. Which seems to be the label with a few chips in it revealing the disc under it. Awhile back someone else posted a pic showing this problem as well on another forum. Mine are kinda like his.

 

http://techforums.ni...11435/image.jpg

 

So yeah should I contact Amazon and get a replacement? Or will it not hurt much? 

 

In a DVD the metal layer lies deep in the disc. So the paint chipping off from the label won't matter.

http://www.clir.org/...ub121/sec3.html



#8 Raiden

Raiden

    wall crusher

  • Members
  • 4,738 posts

Posted 15 October 2014 - 06:26 AM

It's not a DVD



#9 storabajskorven

storabajskorven

    Boo

  • Members
  • 572 posts
  • NNID:Stranders

Posted 15 October 2014 - 07:36 AM

It's not a DVD

 

You're right, my bad. It's more like a BluRay, which means the information is stored closer to the bottom layer instead. (Which in turn means that it has protection on that side.) But it means that what happens to the top of it is even more irrelevant.






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

Anti-Spam Bots!